Finally there is some progress to show
The build obviously started with the running gear; the assembly was pretty much straight forward. Details are nice, clean and crisp which is already expected from Dragon.
Suspensions didn't cause much problems either.
As far as the idlers' suspension the instructions didn't specify not to glue the parts A11 and A23(A24) together; but if you try to dry fit it before the actual gluing it is easy to notice that the suspension can be made movable. A11 gets glued to A25(A26) while A23(A24) [after the suspension is assembled and dried] left moving freely around A11. When it is attached to the hull A23(A24)is the only part that gets glued to the bottom of a hull. That way it will be movable.
It may seems like there is no much point to it unless you have workable tracks, but you need it to move in order to adjust the idler to make sure all wheels are lined up.
After that it could be glued permanently.
Before working on the upper part of the hull I will need to glue the propellers, but they have to be thinned out first. Way to thick for the scale.